- Description
Description
Bakor Blue Skin Primer Spray Can
Related Products
-
Vulkem 191QD Primer
$349.65Vulkem® Primer #191 QD is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. -18.9L – 5 Gal
-
Elastocol Stick H2O
$178.00ELASTOCOL STICK H2O is a polymer emulsion-based primer designed to improve the adhesion of self-adhesive waterproofing membranes on most substrates. It is an excellent choice when the use of solvent-based primer is not recommended. – 5 Gal – Blue
-
Blueskin WP200 3′ x 66.7′
Call for PriceBlueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
-
Sopraseal Stick Primer
$143.35Solvent-based primer specifically designed to enhance the adhesion of SOPRASEAL self-adhesive membranes on walls. – 5 gal – Orange
-
Elastocol Stick -1 Gal
$27.74Primer designed to enhance the adhesion of self-adhesive membranes on porous surfaces. It is composed of SBS synthetic rubbers, adhesion-enhancing resins and volatile solvents. It is used as a primer on surfaces such as concrete, metal, and wood. – 1 Gal – Red
-
Bakor Blueskin VP100 – 4′ x 100′
Call for PriceThis next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.
-
Henry (Bakor) Air-Bloc 33
$193.31Bakor Air Bloc 33 18.93 L
-
Blueskin SA – 4″ x 75′
$18.20Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
Epoxy Primer
$201.48Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
-
Henry CM100
Call for PriceHenry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
