- Description
Description
Delta Drain 6000 4′ * 50′
Related Products
-
TREMDrain 6000
$196.00TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
-
Blueskin WP200 3′ x 66.7′
Call for PriceBlueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
-
Colphene 3000
$140.30Self-adhesive waterproofing membrane composed of SBS modified bitumen used on foundation walls and other below grade vertical walls.
-
3M Fire Barrier Duct Wrap 615+
$325.00A fire resistant wrap consisting of a patented inorganic blanket encapsulated with a scrim-reinforced foil, used to fire rate commercial kitchen grease ducts an air ducts and provide an alternative to 1 or 2 hour fire resistant rated shaft enclosures. 24″x 25′
-
Rockwool Techton
Call for PriceROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system.
4″ and 2″ Inch Available
-
Henry CM100
Call for PriceHenry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
TREMDrain Termination Bar Aluminum – 10ft
$13.45Tremco Drain Termination Bar Aluminum 10′ lengths
-
Vulkem OC810 One Coat
$401.27Vulkem OC810 Coating is ideal for light pedestrian traffic areas such as balconies, roof terraces, and mechanical rooms. It also can be used as a waterproofer for window eyebrow applications.
Available: Black, Beige, Gray, White, Limestone, Maple, Slate Gray
-
Delta Drain 6000 – 6′ x 50″
$199.00Delta Drain 6000 6′ * 50″
-
Soft Rod 5/8″ x 1550′
$128.52Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
