Delta Drain Termination Flashing 2″ * 6’6″
Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
Soft Rod 1 1/2″ x 396′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system.
4″ and 2″ Inch Available
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
TREMDrain Termination Bar Aluminum – 10ft
Tremco Drain Termination Bar Aluminum 10′ lengths
Delta Drain Termination Bar – 1″ x 6′ 6″
Delta Drain Termination Bar 1″ x 6’6″
3M Fire Barrier Duct Wrap 615+
A fire resistant wrap consisting of a patented inorganic blanket encapsulated with a scrim-reinforced foil, used to fire rate commercial kitchen grease ducts an air ducts and provide an alternative to 1 or 2 hour fire resistant rated shaft enclosures. 24″x 25′
Soft Rod 5/8″ x 1550′