Tape Hurricane 2″ x 60 yds.
Blueskin WP200 3′ x 66.7′
Blueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
Bakor Blueskin VP160
This fully adhered, vapor permeable membrane system eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Bonded with a patented, permeable adhesive layer and split-back poly-release film, Blueskin® VP160 adheres to the wall substrate without mechanical attachment.
Bakor Blueskin VP100 – 4′ x 100′
This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.
EXOAIR® 220 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 220 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
Soft Rod 1 1/2″ x 6′ length stick
Soft Rod 1 1/8″ x 500′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
Henry (Bakor) Air-Bloc 17 MR
Liquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane. – 18.9L – 5 Gal – Black
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available.
Universal Drain Tees – 6″
Universal Drain Tees – 6″