- Description
Description
Tremco Foam Gun Plastic
Related Products
-
Sikaflex 2C Colour Pack – Aluminum Grey
$7.50Two-component polyurethane elastomeric sealant.
-
Henry Air-Bloc 31 MR
Call for PriceLiquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc®31MR cures to a tough, monolithic rubber-like membrane.
-
Handle Broom Metal W
$9.95Versatile Handle Broom Metal W.
Nylon Threaded Tip 60″ -
Soft Rod 1 1/2″ x 396′
$145.00Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Available: 5/8, 7/8, 1 1/8, 3/8
-
ExoAir 230
Call for PriceEXOAIR® 230 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 230 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
-
Soft Rod 1 1/8″ x 500′
$109.54Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Available: 5/8, 7/8, 1 1/8, 3/8
-
Rockwool Techton
Call for PriceROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system.
4″ and 2″ Inch Available
-
Paraseal GM/LG
$319.90Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Soft Rod 7/8″ x 850′
$118.69Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
Soft Rod 5/8″ x 1550′
$128.52Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
