
Tremco Primer Silicone Porous 473ml
$80.00
Tremco Primer Silicone Porous (Concrete) 473ml
- Description
Description
Tremco Primer Silicone Porous (Concrete) 473ml
Related Products
-
Paraseal LG
Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Soft Rod 5/8″ x 1550′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
Sikaflex 2C Colour Pack – Aluminum Grey
$7.50 -
Sopraseal Stick 1100 – 36″ x 75′
Self-adhesive air/vapour barrier membrane composed of SBS modified bitumen and a tri-laminated woven polyethylene facer used on walls. It can also be used as masonry and through-wall flashing membrane as well as waterproofing membrane at openings and transitions.
Available: 18″ x 75′, 12″ x 75′, 9″ x 75′, 4″ x 75′,
-
Paraseal GM/LG
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Colphene 3000
Self-adhesive waterproofing membrane composed of SBS modified bitumen used on foundation walls and other below grade vertical walls.
-
ExoAir 120
EXOAIR® 120 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 120 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings. – 18.9L – 5 Gal – Black
-
Henry CM100
Henry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
-
Bakor Blueskin VP160
This fully adhered, vapor permeable membrane system eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Bonded with a patented, permeable adhesive layer and split-back poly-release film, Blueskin® VP160 adheres to the wall substrate without mechanical attachment.
-
Soft Rod 2″ x 228′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.