Tremco Tremsil 600 – 600ml Sausage 15 /case
EXOAIR® 230 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 230 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
Soft Rod 7/8″ x 850′
Soft Rod 5/8″ x 1550′
Soft Rod 2″ x 228′
Vulkem 360NF QC Catalyst
Soft Rod 1 1/2″ x 396′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
3M Fire Barrier Duct Wrap 615+
A fire resistant wrap consisting of a patented inorganic blanket encapsulated with a scrim-reinforced foil, used to fire rate commercial kitchen grease ducts an air ducts and provide an alternative to 1 or 2 hour fire resistant rated shaft enclosures. 24″x 25′
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
JT Tape Black – Rolls
Paraseal® Para JT™ is an adhesive joint tape compound formulated with cross-linked polymeric elastomers.
Para JT is utilized with Paraseal LG membrane in vaporproofing installations for effectively sealing around penetrations. When used with Paraseal GM, it creates double seals on all joints forming two complete and independent waterproofing systems. When used with Paraseal GM, it forms a natural gas and waterproof joint.
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system.
4″ and 2″ Inch Available