Cox Caulking Gun Part Grout Nozzle-Tuck Point
EXOAIR® 230 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 230 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
ExoAir 111 – 18″ x 75′
ExoAir® 111 is a composite 24-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 111 is 20 mils of high-performance butyl laminated to 4 mils of metalized highdensity polypropylene film and a siliconized release liner.
Vulkem 360NF QC Catalyst
Soft Rod 1 1/2″ x 6′ length stick
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
Bakor Blueskin VP100 – 4′ x 100′
This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.
ExoAir 111 – 12″ x 75′
ExoAir® 111 is a composite 24-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 111 is 20 mils of high-performance butyl laminated to 4 mils of metalized highdensity polypropylene film and a siliconized release liner. – 4 rolls a box
Sopraseal Stick 1100 – 36″ x 75′
Self-adhesive air/vapour barrier membrane composed of SBS modified bitumen and a tri-laminated woven polyethylene facer used on walls. It can also be used as masonry and through-wall flashing membrane as well as waterproofing membrane at openings and transitions.
Available: 18″ x 75′, 12″ x 75′, 9″ x 75′, 4″ x 75′,
Universal Drain Tees – 6″
Universal Drain Tees – 6″
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available.