Cox Caulking Gun Portland 1000 ml
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available.
Soft Rod 3/8″ x 2100′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Soft Rod 7/8″ x 850′
Bakor Blueskin VP100 – 4′ x 100′
This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.
Soft Rod 5/8″ x 1550′
Henry Air-Bloc 31 MR
Liquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc®31MR cures to a tough, monolithic rubber-like membrane.
ExoAir 110 – 36″ x 75′
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
Blueskin WP200 3′ x 66.7′
Blueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
EXOAIR® 220 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 220 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
Soft Rod 2″ x 228′