Foam Tape Acoustic 1/4″ x 3/8″ x 50′
ExoAir 110 – 24″ x 75′
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
EXOAIR® 230 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 230 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
Henry (Bakor) Air-Bloc 17 MR
Liquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane. – 18.9L – 5 Gal – Black
ExoAir 111 – 24″ x 75′
ExoAir® 111 is a composite 24-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 111 is 20 mils of high-performance butyl laminated to 4 mils of metalized highdensity polypropylene film and a siliconized release liner.
Bakor Blueskin VP160
This fully adhered, vapor permeable membrane system eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Bonded with a patented, permeable adhesive layer and split-back poly-release film, Blueskin® VP160 adheres to the wall substrate without mechanical attachment.
Universal Drain Tees – 6″
Universal Drain Tees – 6″
EXOAIR® 120 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 120 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings. – 18.9L – 5 Gal – Black
Soft Rod 1 1/2″ x 396′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available.
Parastick ‘n’ Dry
Paraseal® Parastick ‘n’ Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. 3″ x 25′