Master Seal Coating Primer 733
Sopraseal Stick 1100 – 36″ x 75′
Self-adhesive air/vapour barrier membrane composed of SBS modified bitumen and a tri-laminated woven polyethylene facer used on walls. It can also be used as masonry and through-wall flashing membrane as well as waterproofing membrane at openings and transitions.
Available: 18″ x 75′, 12″ x 75′, 9″ x 75′, 4″ x 75′,
Sikaflex 2C Colour Pack – Aluminum Grey$7.50
Henry (Bakor) Air-Bloc 17 MR
Liquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane. – 18.9L – 5 Gal – Black
Soft Rod 2″ x 228′
ExoAir 111 – 12″ x 75′
ExoAir® 111 is a composite 24-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 111 is 20 mils of high-performance butyl laminated to 4 mils of metalized highdensity polypropylene film and a siliconized release liner. – 4 rolls a box
ExoAir 110 – 36″ x 75′
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
Soft Rod 7/8″ x 850′
Bakor Blueskin VP100 – 4′ x 100′
This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.
Parastick ‘n’ Dry
Paraseal® Parastick ‘n’ Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. 3″ x 25′