
- Description
Description
Tremco Tremstop MCR 2″ X 25′ Roll
Related Products
-
Handle Broom Metal W
Versatile Handle Broom Metal W.
Nylon Threaded Tip 60″ -
Soft Rod 3/8″ x 2100′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
Soft Rod 1 1/8″ x 500′
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
Sopraseal Stick 1100 – 36″ x 75′
Self-adhesive air/vapour barrier membrane composed of SBS modified bitumen and a tri-laminated woven polyethylene facer used on walls. It can also be used as masonry and through-wall flashing membrane as well as waterproofing membrane at openings and transitions.
Available: 18″ x 75′, 12″ x 75′, 9″ x 75′, 4″ x 75′,
-
Henry Air-Bloc 31 MR
Liquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc®31MR cures to a tough, monolithic rubber-like membrane.
-
Soft Rod 1 1/2″ x 6′ length stick
Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
Rockwool Techton
ROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available. -
Mapelastic
All-Climate, Flexible, Cementitious Membrane for Waterproofing and Protecting Concrete and Masonry. – 70.5 lb – Grey
-
Parastick ‘n’ Dry
Paraseal® Parastick ‘n’ Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. 3″ x 25′
-
Paraseal GM/LG
Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′