
Vulkem 350NF SL
$185.00
- Description
Description
Tremco Vulkem 350 NF SL Grey Base Coat 18.9 L
Related Products
-
Vulkem 360NF QC Catalyst
Vulkem 360NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system.
-
TREMstop IA+
TREMstop® IA+ is a high-performance, single-component, water-based, firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire.
-
Epoxy Primer
Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
-
Vulkem 350 SL
$185.00 -
Vulkem 360NF
Vulkem 360NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal – Gray
-
TREMstop Fyre-Sil SL
Self-Leveling Silicone Sealant
TREMstop® Fyre-Sil SL is a self-leveling, neutral-cure silicone sealant designed for use in firestop applications, including both joints and throughpenetrations.
-
Tremco 830
$11.11 -
Vulkem 351
Vulkem 350/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system. – 5 Gal
-
Vulkem 801
Vulkem 801 is suitable for application to substrates that have had loose materials completely removed and major defects repaired and leveled by conventional methods. Vulkem 801 is also often used on tanks and ducts where a high performance protective coating is required that can handle both horizontal and vertical application as well as immersion. Vulkem 801 has excellent resistant to ponded water and to most acids, alkalis, salts, fats and solvents. Can be used in gutter and rainwater applications. – 5 Gal – Grey
-
Parastick ‘n’ Dry
Paraseal® Parastick ‘n’ Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. 3″ x 25′