Waterproofing
-
Vulkem 350NF SL
$185.00Tremco Vulkem 350 NF SL Gray Base Coat 18.9 L
-
Tremco Tremproof 250 GC SL
$208.35Tremco Tremproof 250 GC SL 18.9 L
-
Tremco Exoair 130 White
Call for PriceTremco Exoair 130 White 18.9 L 5gal
-
Vulkem 350 SL
$185.00Tremco Vulkem 350 SL Grey Base Coat 18.9L Pail
-
Epoxy Primer
$201.48Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
-
Vulkem 191 Primer (1-Gal)
$73.45Vulkem® Primer #191 QD is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat. – 3.8L – 1 Gal
-
Mesh Membrane Tietex 326
$268.00T326 GRADE (2.75 OZ) Firm-Finish Stitch Bonded Polyester Roofing Reinforcement Fabric, for Waterproofing – 40″ X 324′ ROLL.
-
TREMDrain 6000
$196.00TREMDrain 6000 is used in conjunction with TREMproof® waterproofing and Paraseal® Membranes. TREMDrain 6000 is designed for vertical and selected horizontal installations requiring high compressive strength and where high flow capacity is necessary.
-
Colphene BSW
$132.50Thermofusible waterproofing membrane composed of SBS modified bitumen designed for blind side waterproofing in horizontal applications.
-
Colphene 3000
$140.30Self-adhesive waterproofing membrane composed of SBS modified bitumen used on foundation walls and other below grade vertical walls.
-
Paraseal LG
$164.00Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Henry CM100
Call for PriceHenry CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure roofing and waterproofing membrane. It provides a cold alternative to hot applied rubberized membrane systems or replaces conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane. – 5 gal – Black
