- Description
Description
Grinding Disk 7″ for Paint Removal
Related Products
-
Rockwool Techton
Call for PriceROXUL® products are mineral wool fibre insulations made from basalt rock and steel slag. This combination results in a non-combustible product with a melting point of approximately 2150°F (1177°C), which gives it excellent fire resistance properties. ROXUL mineral wool is a water repellent yet vapour permeable material.
These rigid mandrel wound pipe sections are strong, preformed mineral wool insulation with excellent thermal performance. Techton™ 1200 is ideal for steam and process pipe systems operating at temperatures up to 1200°F (650°C), where energy conservation, personnel protection and fire control are concerns. Techton 1200 is impregnated to provide high water-repellent characteristics, making it suitable for application in conditions where moisture can penetrate the insulation system. 4″ and 2″ Inch Available.
-
Blueskin SA – 24″ x 75′
Call for PriceBlueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
-
ExoAir 230
Call for PriceEXOAIR® 230 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 230 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
-
Soft Rod 5/8″ x 1550′
$128.52Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
-
ExoAir 220
$153.00EXOAIR® 220 is typically applied to exterior sheathing panels, concrete block, poured concrete or wood substrates as an air and vapor barrier material. EXOAIR® 220 can be used with EXOAIR 110, EXOAIR 111 or EXOAIR 230 to transition into window and door openings.
-
Paraseal GM/LG
$319.90Paraseal® GM/LG is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT™ Tape and Parastick ‘n’ Dry® Tape installation. – 20mils – 4′ x 24′
-
Soft Rod 3/8″ x 2100′
$67.36Tremco ITP Soft Type Backer Rod is a soft, grey, pliable, non-gassing backup material inserted into an expansion or contraction.
Available: 5/8, 7/8, 1 1/8, 3/8
-
ExoAir LEF
$9.75The ExoAir LEF is best suited around window and door frame joints but can also be used as an effective joint filler in hidden applications. LEF is most commonly used as a thermal and sound barrier. The product can be installed in temperatures ranging from 14 to 95° F (-10 to 35° C).
-
Blueskin WP200 3′ x 66.7′
Call for PriceBlueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
-
Blueskin SA – 12″ x 75′
$56.38Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
