Firestop Caulking Supply – Wholesale Construction: Sealants, Air barrier, Waterproofing, Coating.

(604) 676-0806

Get in touch with us
Contact Us

Send us an e-mail

Supplying Construction Professionals since 1992

|

We Supply the Construction Professionals with

Firestop

Sealants

Deck Coating

Air Barrier

Waterproofing

Firestop Caulking Supply Ltd. is a wholesale distributor of specialty products for the new construction, restoration, retrofitting, building envelope and glazing industries in British Columbia.

We service in firestopping, construction sealants, traffic coating, building envelope and waterproofing materials, and all allied companion products to complete your project. View More

firestopcaulkingsupply

3M Fire Barrier Sealant IC 15WB+ is a cost-effecti

3M Fire Barrier Sealant IC 15WB+ is a cost-effective, one-part, gun-grade, latex-based, intumescent firestop sealant that dries to form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M Fire Barrier Sealant IC 15WB+ firestops through penetrations passing through fire-rated floor, floor/ceiling or wall assemblies, as well as other fire-rated interior building partitions and assemblies (e.g. static construction joints or blank openings).
•$13.94/sausage
•www.firestopcaulking.com

A flexible firestop for metal pipe, cable penetrat

A flexible firestop for metal pipe, cable penetrations and top-of-wall applications, 3M™ Fire Barrier Sealant FD 150+ cures upon exposure to the atmosphere to form a monolithic seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.

Features:
•Remains pliable, allowing for typical pipe movement
•Water-based for easy installation, cleanup and disposal
•Endothermic fillers absorb heat and release water
•High-solids formula means limited shrinkage
•Multi-viscosity grade offers excellent sealant properties •$9.46/sausage
•www.firestopcaulking.com

3M Fire Barrier Sealant CP 25WB+ is a high-perform

3M Fire Barrier Sealant CP 25WB+ is a high-performance, ready-to-use, gun-grade, latex-based, intumescent sealant that dries to form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M Fire Barrier Sealant CP 25WB+ helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire when installed in accordance with a listed through penetration or fire-resistive joint assembly system.
•$16.86/per sausage •www.firestopcaulking.com

Planiseal 88 is a one-component, polymer-modified,

Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing concrete & masonry surfaces.
Features: Great adhesion to properly prepared concrete & masonry subtrates, highly resistant to water penetration, applicable by trowel/brush
Where to use: Waterproofing horizontal, vertical & overhead surfaces.
•$33.37/bag
•www.firestopcaulking.com

3M™ Fire Barrier Water Tight Sealant 1000 NS is

3M™ Fire Barrier Water Tight Sealant 1000 NS is a non-slump, neutral cure, single component silicone firestop. Upon exposure to atmospheric humidity, it forms a flexible firestop seal to help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.

Typical firestop Applications include blank openings, dynamic and static construction joints and through penetrations.
Penetrating items that pass through fire-rated assemblies include metallic pipes, non-metallic pipe, cables, cable tray, insulated pipes and combos
$16.54/sausage

Vulkem® 950NF & 951NF Topcoats are high-performan

Vulkem® 950NF & 951NF Topcoats are high-performance, Neighbor-Friendly, two-part polyurethane coatings for vehicular (heavy duty) & pedestrian (medium duty) applications where low-odor & extremely durable coatings are desired. These topcoats are applied over a cured Vulkem basecoat. Vulkem 950NF Topcoat can be used both as an intermediate coat for the Tremco heavy duty system and a topcoat for interior applications. Vulkem 951NF is a low-odor topcoat designed for exterior applications and for use over Vulkem 950NF in heavy duty applications.

Basic Uses: This deck coating system is designed for waterproofing plaza decks, recreation decks, balconies, mechanical rooms, stadiums, parking stalls and similar primarily concrete and masonry applications requiring an elastomeric waterproofing system.
•$270.90/per kit
•www.firestopcaulking.com

Tremsil® 200 is a single component, acetoxy silic

Tremsil® 200 is a single component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air.
Basic Uses: Tremsil 200 produces a weathertight seal to glass, metal, porcelain, ceramic and most painted surfaces. Tremsil 200 sealant is suitable for use in kitchens, bathrooms, spas and similar applications
•$4.47/per tube
•www.firestopcaulking.com

Vulkem 350NF-SL Base Coat is a single-component, l

Vulkem 350NF-SL Base Coat is a single-component, low-odor, low VOC, urethane membrane that bonds firmly to clean, dry concrete, plywood and metal. It retains its integrity even if substrate movement causes hair-line cracks of up to 1/16" (1.5 mm). If cut or damaged, Vulkem 350NF will prevent water migration between itself and the substrate. Vulkem 350NF is available in roller (R) and in self-leveling (SL) grade for vertical and horizontal application. •$185.00/pail
•604-676-0806

DOWSIL™ 790 Silicone Building Sealant offers out

DOWSIL™ 790 Silicone Building Sealant offers outstanding unprimed adhesion to masonry and is particularly effective for sealing expansion and control joints, precast concrete panel joints, Exterior Insulation and Finish Systems (EIFS) joints, curtainwall joints, mullion joints, stone pavers, and many other construction joints. When used in accordance with Dow application and testing recommendations, the sealant forms a durable, flexible, watertight bond with many common building materials, including combinations of stone, concrete, masonry, granite, marble, aluminum, painted substrates, and glass. •$17.50/per sausage
•www.firestopcaulking.com

3M™ Fire Barrier Moldable Putty Pads MPP+ are a

3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to four hours.
•$7.95/per pad
•www.firestopcaulking.com

TREMstop® IA+ is a high-performance, single-compo

TREMstop® IA+ is a high-performance, single-component, water-based, firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire.
Basic Uses: TREMstop IA+ is tested to treat the majority of the common applications found on a job site, including metal pipe, plastic pipe, insulated pipe, cables, ducts and multiple penetrations.
•$16.53/sausage
•www.firestopcaulking.com

TREMstop® Acrylic is a gunnable acrylic latex sea

TREMstop® Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations.
Basic Uses: TREMstop Acrylic is for use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies. TREMstop Acrylic can also be used on acoustically rated assemblies. •$10.04/sausage
•www.firestopcaulking.com

Self-Seal® GG-266 is a single-component, neutral

Self-Seal® GG-266 is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors. When exposed to temperatures in excess of 150°C (300°F) it will begin to expand. As the combustible penetrating item softens & collapses under fire conditions, the silicone composition will rapidly intumesce to fill the void with a patented char composite that contains expanded graphite. The cured silicone rubber composition exhibits excellent performance stability & provides a pressure tight seal resistant to water, smoke & toxic gases. •$20.25/sausage
•www.firestopcaulking.com
•604-676-0806

Self-Seal® GG-200 is a single-component, low modu

Self-Seal® GG-200 is a single-component, low modulus, non-slumping silicone firestop sealant designed for wall & floor applications. It forms a pressure tight seal resistant to water, smoke and toxic gases. The sealant is also resistant to cracking, ultraviolet radiation & ozone •$24.75/sausage
•www.firestopcaulking.com
•604-676-0806

Self-Seal®SL-100 Self-Leveling Silicone Firestop

Self-Seal®SL-100 Self-Leveling Silicone Firestop is a single-component, low modulus, self-leveling silicone firestop sealant designed for floor applications. Its self-leveling property reduces labour costs (little or no tooling required) particularly around congested service penetrations assuring that all voids are sealed. It forms a pressure tight seal resistant to water, smoke & toxic gases.The sealant is also resistant to cracking, ultraviolet radiation & ozone.
•$15.18/sausage
•www.firestopcaulking.com
•604-676-0806

DAP® ALEX Fast Dry® Acrylic Latex Caulk Plus Sil

DAP® ALEX Fast Dry® Acrylic Latex Caulk Plus Silicone is ideal for projects that require painting shortly after caulk application. In 20 minutes, the caulk forms a tough outer skin that’s dry enough to paint over with latex paints. This durable, flexible caulk won’t crack paint and provides a waterproof seal. It is easy to apply and tool, low in odor, and cleans up easily with water. Once cured, caulk is mold and mildew resistant. Can be used indoors or out and exceeds ASTM Specification C834.

Suggested Uses: Ideal for caulking and sealing:
•Window & door frames •Baseboards & molding •Corner joints •Siding & trim •Vents, ducts, pipes •www.firestopcaulking.com
•$7.88/tube

DOWSIL™ Tub, Tile & Ceramic Silicone Sealant is

DOWSIL™ Tub, Tile & Ceramic Silicone Sealant is a one-part acetoxy cure silicone sealant for non-porous surface applications requiring a sealant that is mildew-resistant when cured.

Applications:
• As an adhesive, sealant or grout for repairing or replacing ceramic tiles • Tub and shower enclosures • Forming watertight seals around bathtubs, shower enclosures, sinks, vanities, countertops, lavatories, faucets, saunas, hot tubs, plumbing fixtures, drains, piping, shower doors and floor seams. •$5.95/Cartridge
•www.firestopcaulking.com

Elastcol Stick Zero is a LEED® compliant primer d

Elastcol Stick Zero is a LEED® compliant primer designed to enhance the adhesion of self-adhesive membranes on various substrates including porous surfaces such as gypsum boards at temperatures above -10 ºC (14 °F). It is composed of synthetic polymers, adhesive enhancing resins and solvents. •Application: Elastocol Stick Zero can be applied with a brush or a roll. It must be thoroughly dry before applying the waterproofing membrane. Elastocol Stick Zerio must be well shaken before use.
•197.58/pail
•www.firestopcaulking.com

3M™ Fire Barrier Water Tight Sealants 1003 SL ar

3M™ Fire Barrier Water Tight Sealants 1003 SL are ready-to-use, single component, neutral cure, silicone sealants that cure upon exposure to atmospheric humidity to form a flexible Firestop seal. 3M™ Fire Barrier Water Tight Sealants help control the spread of fire, smoke & noxious gasses before, during & after exposure to a fire when installed in accordance with a listed through penetration or fire-resistive joint assembly. •$16.54/sausage
•604-676-0806
•www.firestopcaulking.com

MasterSeal TC 225 is a liquid applied moisturecure

MasterSeal TC 225 is a liquid applied moisturecure polyurethane seamless coating. MasterSeal Traffic Systems tough, alaphatic top coat ensures long life and suitability for public locations. •604-676-0806
•www.firestopcaulking.com

Load More... Follow on Instagram

Supplying Construction Professionals since 1992